How to Draw Lighting Plan in Autocad

Inserting CAD Electrical Symbols

 into an AutoCAD Lighting Plan Tutorial Gratuitous AutoCAD Tutorial

This is a quick and uncomplicated tutorial on placing lighting plan symbols in your AutoCAD drawings, so allow'southward get started!

If you haven't used the Nearest osnap setting very oft, this free CAD tutorial is a nifty place to use it. The Nearest osnap setting lets you place a block onto a object with a perfect connexion, just let'southward you pick it's exact location. Nearest gives you the most flexibility in accruately placing blocks where you want them, not on some geometric point on an object.

Commencement, set up the Running Osnap to Nearest, for this task I uncheck all the other settings considering they just get in the way. The quickest manner to the Osnap settings is from your Condition bar at the bottom of your screen. Correct-Click on Osnap, then select Settings.

Once you lot set Nearest as your osnap information technology will but use that osnap, and it will be on all the fourth dimension.

Let's say we want to place a unmarried switch next to a door opening into a room. Get and find your switch block to insert. I utilize Design Center to manage all my blocks. I have a block library specifically for lighting plans.

If you don't have a library for lighting symbols, don't draw them all from scratch, that is a massive waste product of time! I accept a library that I sell, that is a neat starter library for anybody needing lighting plan symbols.

Below, I have located my electrical symbols in Blueprint Middle. I can drag and drop the symbol into my drawing, or If I want to rotate the symbol onto a wall, I need to double-click the symbol in Design Center (equally shown below with the ruddy arrow).

Once you double-click with the left mouse button, y'all become the Insert dialog box for inserting blocks into AutoCAD. The block you selected is bear witness in the preview. Select OK, and y'all will so be prompted for two things, insertion signal, and rotation.

Once y'all pick OK, yous are prompted for the insertion betoken. Drag your switch symbol to the location on the wall next to the door. Every bit your crosshairs impact the wall line you lot will see the Nearest osnap marker appear (it is the hourglass figure - meet beneath). You can then drag the symbol up and downwardly the wall line to the location that you lot desire, and then option exactly where you lot desire the symbol to attach to the wall. The Nearest osnap volition arrive a perfect connectedness.

Next, you are prompted for Rotation. This is where Nearest works actually well. Just drag your crosshairs along the wall, and pick anywhere (equally long as the Nearest mark is showing). When you see your symbol rotated to where you want information technology, just pick, and the symbol is placed perfectly onto your wall. ( the Nearest osnap actually snaps onto the wall you are attaching the symbol to, and gives information technology a perfect 90 caste rotation to the wall).

With Design Middle, and using the Osnap setting of Nearest, you can chop-chop, and accurately place your lighting symbols in your drawings.

SPEED TIP: Once you lot Insert a symbol and rotate it into position, if you need the same symbol with the same rotation in other rooms, it'due south faster to Copy the symbol into the other rooms, than information technology is to Insert each new symbol one at a time.

Next lesson: drawing those perfect wiring arcs from your switches to the lighting fixtures as shown below.

That's all Folks!

To get to the Electrical Symbols production page at ArchBlocks.com click below:

zimmermansumanducke.blogspot.com

Source: https://www.archblocks.com/free-autocad-tutorials/electrical-symbols-tutorial

Share this post